
Home
About us
Products
	Rubber extruder

	Silicone extrusion units

	Continuous vulcanization lines

	Material feed and down stream equipment

	Gear pumps

	Mixing and laboratory mills

	Rubber laboratory equipment

	Rubber technology and turn key projects

	Extrusion heads

	Second-hand machinery

News
Fairs
Contact
Downloads
Representatives
Impressum
Sitemap

Extruder - Gear pump - Combination

Rubber gear pumps in combination with cold feed extruders for manufacturing of extrudates with highest demands on product dimension accuracy and process stability. The gear pump is arranged between the extruder and the extruder head. The extruder feeds the gear pump with a low inlet pressure. The gear pump builds up the compound pressure in order to overcome the resistance of the extrusion die.

Application:

For every kind of rubber compound
For profiles with highest demands on dimension accuracy and stability
For reinforced and non reinforced hoses
For roll covering
For straining and strip production
For the filling of big moulds

gear pump ZRP 090

pressure measured in inlet and outlet

section of the gear pump
click to enlarge

pin barrel extruder - gear pump - combination

Type	ZRP 063	ZRP 090	ZRP 150
Capacity m (kgs/h)	10-120	25-500	80-1200
Max.pressure p (bar)	500	500	500
Max. pressure difference p (bar)	400	400	400
Gear speed, adjustable n (r.p.m.)	6-50	3,5-60	3,5-60
Motor power P (kW)	12	22	27
Control	PLC control
Heating/cooling	water based system for gears and housing
Machine frame	all units are mounted on a common frame
Operator panel	with touch screen, hinged

print version

Results

Lowest pressure variations with high dimension accuracy
increases the output at high back pressure
avoids the overflowing of the vacuum port in connection with vent extruders
Extrusion, straining and out forming in one process
Universal use in every kind of extrusion line

filling of moulds

	© by rubicon GmbH			[ Home \| Products \| News \| About us \| Contact \| Impressum ]